|
|
|
Introduction of GM-0.33III
GM-0.33III diaphragm vacuum pump is designed and produced by us,
GM-0.33III diaphragm vacuum pump has features of more advanced design,
higher efficiency, longer operating life. It is an all new product engaging in the
new and high technology,It is mainly used in medicinal products analysis,
tenuously chemical engineering, biochemical pharmacy, food examination,
investigating and solving criminal case, etc. It is an ideal product used with the
high-accuracy chromatogram apparatus, rotary evaporators,
and it is the essential equipment in the laboratory.
The body of GM-0.33III diaphragm vacuum pump is made of
aluminum alloy through die casting. It is antiseptic, sprayed,
agile and beautiful. It has the features of higher antisepsis,
wider working range. It can meet requirements of all kinds of
working environments.
Technique parameter
|
Pumping speed:
(L/Min) |
20 |
Pump Head |
2 |
|
Ultimate Pressure |
20-50mbar |
Voltage Rating |
230Vac, 50Hz |
|
Dimensions
(L x B x H)（ｍｍ） |
282×130×210 |
Temp of the body（℃） |
<55 |
|
Power（w） |
250 |
Weight （Kg） |
10 |
|
Connection:
Inlet (mm)
Outlet (mm) |
φ6
Silencer |
Material: Diaphragm
Valves
Pump head |
HNBR (PTFE coated)
HNBR(PTFE coated)
PTFE coated |
|
Working Temp（℃） |
7—40 |
Noise Level（dB） |
<50 |
|
|
|
|
|
|
|
|
Attachments
1. vacuum manometer(-0.1Mpa) 1 piece
2. connecting rubber pipe(Φ8ｍｍ*Φ15ｍｍ*800ｍｍ) 1 piece |
|
|
|
Introduction of GM-0.33II
GM-0.33II diaphragm vacuum pump is designed and produced by Us
GM-0.33II diaphragm vacuum pump has features of more advanced design,
higher efficiency, longer operating life. It is an all new product engaging in
the new and high technology. It is mainly used in medicinal products analysis,
tenuously chemical engineering, biochemical pharmacy, food examination,
investigating and solving criminal case, etc. It is an ideal product used with
the high-accuracy chromatogram apparatus, HPLC solvent filter apparatus,
and it is the essential equipment in the laboratory.
The body of GM-0.33II diaphragm vacuum pump is made of aluminum alloy
through die casting. It is antiseptic, sprayed, agile and beautiful.
It has the features of higher antisepsis, wider working range.
It can meet requirements of all kinds of working environments.
Technique parameter
|
Pumping speed:
(L/Min) |
20 |
Pump Head |
1 |
|
Ultimate Pressure |
200mbar |
Voltage Rating |
230Vac, 50Hz |
|
Dimensions
(L x B x H)（ｍｍ） |
235×140×210 |
Temp of the body（℃） |
<55 |
|
Motor Power（w） |
160 |
Weight （Kg） |
7.5 |
|
Inlet (mm)
Outlet (mm) |
φ6
Silencer |
Diaphragm
Valves
Pump head |
HNBR (PTFE coated)
HNBR (PTFE coated)
PTFE coated |
|
Working Temp（℃） |
7—40 |
Noise Level（dB） |
<50 |
Attachments
1. vacuum manometer(-0.1Mpa) 1 piece
2. connecting rubber pipe(Φ7ｍｍ*Φ12ｍｍ*800ｍｍ) 1 piece |
 |
|
Introduction of GM-0.50II
GM-0.50II diaphragm vacuum pump is designed and produced by Us
GM-0.50II diaphragm vacuum pump has features of more advanced
design, higher efficiency, longer operating life. It is an all new product
engaging in the new and high technology. It is mainly used in medicinal
products analysis, tenuously chemical engineering, biochemical pharmacy,
food examination, investigating and solving criminal case, etc. It is an ideal
product used with the high-accuracy chromatogram apparatus,
rotary evaporators, and it is the essential equipment in the laboratory.
The body of GM-0.50II diaphragm vacuum pump is made of aluminum alloy
through die-casting. It is antiseptic, sprayed, agile and beautiful.
It has the features of higher antisepsis, wider working range.
It can meet requirements of all kinds of working environments.
Technique parameter
|
Pumping speed:
(L/Min) |
30 |
Pump Head |
2 |
|
Ultimate Pressure |
<50mbar |
Voltage Rating |
230Vac, 50Hz |
|
Dimensions
(L x B x H)（ｍｍ） |
282×130×210 |
Temp of the body（℃） |
<55 |
|
Motor Power（w） |
160 |
Weight （Kg） |
10 |
|
Connection:
Inlet (mm)
Outlet (mm) |
φ6
Silencer |
Material: Diaphragm
Valves
Pump head |
HNBR (PTFE coated)
HNBR (PTFE coated)
PTFE coated |
|
Working Temp（℃） |
7—40 |
Noise Level（dB） |
<50 |
Attachments
1. vacuum manometer(-0.1Mpa) 1 piece
2. connecting rubber pipe(Φ8ｍｍ*Φ15ｍｍ*800ｍｍ) 1 piece
|
HEB GM-1.00 diaphragm vacuum pump is designed and produced by
Xi'an Heb Biotechnology Co.,Ltd
HEB GM-1.00 diaphragm vacuum pump has features of more advanced design,
higher efficiency, longer operating life. It is an all new product engaging in the new and
high technology. It is mainly used in medicinal products analysis,
tenuously chemical engineering, biochemical pharmacy, food examination,
investigating and solving criminal case, etc. It is an ideal product used with
the high-accuracy chromatogram apparatus, and it is the essential equipment
in the laboratory.
The body of HEB GM-1.00 diaphragm vacuum pump is made of aluminum alloy
through die casting. It is antiseptic, sprayed, agile and beautiful.
It has the features of higher antisepsis, wider working range.
It can meet requirements of all kinds of working environments.
|
Pumping speed:
(L/Min) |
60 |
Pump Head |
2 |
|
Ultimate Pressure
Vacuum
Pressure |
≥0.08Mpa
200mbar
40 Psi |
Voltage Rating |
230Vac, 50Hz |
|
Pressure |
≥ 30 Psi |
Noise Level（dB） |
<50 |
|
Dimensions
(L x B x H)（ｍｍ） |
300×160×235 |
Temp of the body（℃） |
<55 |
|
Motor Power（w） |
160 |
Weight （Kg） |
10 |
|
Inlet (mm)
Outlet (mm) |
φ6
Φ6 |
Diaphragm
Valves |
NBR
NBR |
|
Working Temp（℃） |
7—40 |
Function |
Vacuum & Pressure |
|
|
|
XA12429