磨机制造商:MVM Hotline 86-29-88265264 | Home | Chinese(中文)
HOMECOMPANYPRODUCTSNEWSSERVICEMESSAGECONTACT USCentrifugeOther Lab
Biochemistry Incubator
                     ——Microprocessor control(with timing function)

Serve for environmental protection, hygiene and anti-epidemic, pharmaceutical test, workstock and aquatic products etc. which applied in scientific research institute, college and manufacture department. It is a dedicated constant-temperature equipment for analysis of water body, BOD test, cultivation and storage of bacteria, moulds and microorganisms, plant cultivation and seed-breeding test.

LRH-150 LRH-250

 

 

 

Features

1.
 Polished stainless-steel chamber, semicircular arcs at corners for easy cleaning, and the space between the shelves in the chamber is adjustable.
2. Microprocessor temperature controller ensures a precise and reliable control.
3. Independent temperature-limiting alarm system ensures experiments run safely. (option)
4. Printer connector and RS485 connector are options which can connect printer and computer to record the parameters and the variations of temperature.. (option)

 
  Specifications
Model
 Biochemistry incubator Biochemistry  incubator (with UV light)
LRH-70
 LRH-150
 LRH-250 MJ-70-Ⅰ
 MJ-150-Ⅰ MJ-150-Ⅱ MJ-250-Ⅰ MJ-250Ⅱ
LRH-70F LRH-150F LRH-250F MJ-70F-Ⅰ MJ-150F-Ⅰ MJ-250F-Ⅱ
Temperature Range 0-60℃ 0-60℃
 With humidity:15~45℃
Without humidity:10~45℃		 0~60℃ With humidity:15~45℃
Without humidity:10~45℃
Display
Resolution
 0.1℃ 0.1℃
Temperature Stability ±0.5℃ ±0.5℃
Humidity Range       60~85%RH   60~85%
Humidity Stability       ±5%~8%RH   ±5%~8%RH
Electrical Requirements 220V 50Hz
Ambient Temperature +5~30℃
Power consumption 350W 450W 650W 350W 450W 680W 650W 850W
Interior Dimension
(mm)W×D×H		 400×350×500 500×370×800 520×460×1050 400×350×500 500×370×800 520×460×1050 600×600×83
External Dimensionl (W×D×H)mm 530×560×1080 600×575×1325 620×690×1590 530×560×1080 600×575×1325 620×690×1590 740×705×1510
Shelves 2(pcs) 3(pcs) 3(pcs) 2(pcs) 3(pcs) 3(pcs)
Timing Range 1-9999 min
Remark In addition to all the features of Model Ⅰ,Model Ⅱhas a microprocessor controller for humidity control.
F is for R134a refrigerant, imported compressor (DANFOSS)
※Specification test under non-load condition: ambient temperature is 20℃,and relative humidity is 50%.
  Options:
1.
 Intelligent programable temperature controller 
2. Printer 
3. Independent temperature-limiting controller 
4. Test hole on the left(diameter-50mm) 
5. BOD socket 
6. RS485 connector
Copyright 2005 HEBINSTRUMENT        ALL Rights Reserved
XA12429