|
——Or Circulating Water Vaccum Pump |
|
Name:SHB-IIIA Water Circulating Multi-purpose Vacuum Pump |
Type:Water-Circulating Vacuum Pump Series | |
Explanation |
Characteristics of uses: Considering the small size of labs, our company has designed this new type bench water circulating vacuum pump, its functions and uses are the same as B type pump. The main machine is made of stainless steel.It is installed with outer circulating device.The vacuum degree is stable.It has an elegant, unique and appearance, delicate and fragile. (1) the machine is installed with two vacuum meters and two sets of tips which can be used independently or in parallel connection. (2) The main machine is made of stainless steel plate and pressed into an elegant shape. The box body is made of special engineering plastics. (3) It is installed with special fluid silencer reducing friction noise created by liquid and gas contained in water, making vacuum degree higher and more stable.Corrosion resisting ,pollutionfree, low noise and easy to move. It is also possible to install vacuum adjusting valve to make operation more convenient. (4) The appearance of IIIA Type Water Circulating Multipurpose Vacuum Pump is the same as those SHB-III and SHB-IIIS Type Vacuum Pumps. But its important parts of jetting devices, three-way devices, check valve and sucking tap are made of stainless steel. (5) The water storage tank is made of newly-developed special plastics which can resist against corrosion and dissolution brought about by operation of organic chemical matters such as acetone and diethyl ether chloroform.
Type |
Power
(W) |
Work Voltage
(V/HZ) |
Flow
(L/ Min) |
Lift
(M) |
Mate -rials
Of Machine Body
|
Materials
Of Machine Casing
|
Maximum
Vacuum Degree
(Mpa) |
Single Tap Air Sucking Amount |
Number
of Taps |
Capaci -ty
of Water
Storage
Tank (L) |
Materials of Water Tank
|
Dime -nsions
(mm) |
Weig -ht
(kg) |
SHB- IIIA |
180 |
220/50 |
80 |
10 |
Icr8N -i9Ti |
Special corrosion-resisting engineer -ing plastics |
0.098 |
10 |
2 |
15 |
Special corrosion-resisting engineer -ing plastics |
385* 280* 420 |
15 |
SHB- III |
SHB- IIIS |
PPS | |
|
Name:SHB-B95/95A Water Circulating Multi-purpose Vacuum Pump |
Type:Water-Circulating Vacuum Pump Series | |
Explanation |
Characteristics of uses: This pump is a large capacity sucking pump improved on the basis of SHB-B88 type pump. It has new type water distributor which can provide multitip jetting and is an ideal large capacity sucking vacuum equipment of labs. The main machine is made of stainless steel with characteristics of corrosion resisting, free of stain, long service life and that water source is not polluted. (1) Single machine, single meter, multitube operation. This machine is installed with five sets of tips which can be used independently or in parallel connection. (2) Corrosion resisting, pllutionfree, stable operation, low noise and long service life. (3) Pump body of the main machine, vane water distributor are made of stainless steel. (4) B95A Type Water Circulating Multi-purpose Vacuum Pump. The outer casing adopts stainless steel which can prevent baking finish from coming off, prevent outer casing from getting rusty and corroded after long time operation and therefore prolong the service life.
Type |
Power
(W) |
Work Voltage
(V/HZ) |
Flow
(L/Min) |
Lift
(M) |
Mate -rials
Of Machine Body
|
Mate -rials
Of Machine Casing
|
Maximum
Vacuum Degree
(Mpa) |
Single Tap Air Sucking Amount |
Number
of Taps |
Capacity
of Water
Storage
Tank (L) |
Materials of Water Tank
|
Dime -nsions
(mm) |
Weight
(kg) |
SHB-B95 |
550 |
220/50 |
100 |
12 |
Icr8Ni9Ti |
Static electri -city sprey |
0.098 |
10 |
5 |
57 |
Polyvinyl chloride |
450* 350* 950 |
40 |
SHB-B95A |
550 |
220/50 |
100 |
12 |
Icr8Ni -9Ti |
Icr8Ni-9Ti |
0.098 |
10 |
5 |
57 |
Polyvinyl chloride |
450* 350* 950 |
40 |
| |
|
|